Research Projects: Difference between revisions

From phys824
Jump to navigationJump to search
No edit summary
 
(43 intermediate revisions by the same user not shown)
Line 4: Line 4:


* practice how a scientist really thinks - if you learn anything in school, it should be how to think; memorization is less useful since you can always look it up.
* practice how a scientist really thinks - if you learn anything in school, it should be how to think; memorization is less useful since you can always look it up.
* get insight into the science of tomorrow which is not the science of yesterday; the new ideas of tomorrow, in any branch of science, will not come from just old physics.  
* get insight into the science of tomorrow which is not the science of yesterday; the new ideas of tomorrow, in any branch of science, will not come from just decades old physics.  
* get  experience  in the same activities that Ph.D. scientists conduct on a daily basis.  
* get  experience  in the same activities that Ph.D. scientists conduct on a daily basis.  


Line 13: Line 13:
The midterm project should be finalized as a paper similar to research articles dealing with [http://arxiv.org/list/cond-mat.mes-hall/new Mesoscale and Nanoscale Physics] posted every day on [http://arxiv.org/ arxiv.org]. The format of the paper mimicking this is:
The midterm project should be finalized as a paper similar to research articles dealing with [http://arxiv.org/list/cond-mat.mes-hall/new Mesoscale and Nanoscale Physics] posted every day on [http://arxiv.org/ arxiv.org]. The format of the paper mimicking this is:


* Title, Name of the person and affiliation, Abstract, Introduction, Methods, Results, Dicussion, Conclusion, and References.  
* Title, Name of the person and affiliation, Abstract, [http://publish.aps.org/PACS PACS codes], Introduction, Methods, Results, Dicussion, Conclusion, and References.  


* Paper should be typed in two column style. For this you can use:  
* Paper should be typed in two column style. For this you can use:  
Line 19: Line 19:
**[http://www.openoffice.org/ Open Office] version of Microsoft Word (Word itself is not advisable since you need additional programs, such as MathType, on the top of it to be able to type equations).
**[http://www.openoffice.org/ Open Office] version of Microsoft Word (Word itself is not advisable since you need additional programs, such as MathType, on the top of it to be able to type equations).


* '''The final report should be produced as a PDF file and emailed to the instructor before the deadline.'''
* '''The final report of the midterm project should be produced as a PDF file and emailed to the instructor, together with your Python, Matlab etc. codes (compress everything into a single file) before the deadline.'''


=== Format of the report for the final project ===
=== Format of the report for the final project ===


The final project will be reported through a Poster Session, during the [[Syllabus | final exam]] time, and it will also include ''peer reviewing''. To make a poster, you can use this [http://www.physics.udel.edu/%7Ebnikolic/teaching/phys660/PDF/poster_template.ppt PowerPoint Template]. Poster printing is available in Smith Hall and its cost will be covered by the Department.
The final project will be reported through a Poster Session, during the [[Syllabus | final exam]] time, and it will also include ''peer reviewing''. To make a poster, you can use this [http://www.physics.udel.edu/%7Ebnikolic/teaching/phys824/POSTER/poster_template.ppt PowerPoint Template]. Poster printing is available in Smith Hall and its cost will be covered by the Department.


== Midterm Research Project: Electronic structure of graphene nanoribbons (deadline: 11/23 at midnight) ==
== Midterm Research Project ==
 
*[[Electronic structure of graphene and topological insulator nanowires]]
The project explores recently discovered graphene nanoribbons (GNRs) by computing their electronic structure as  equilibrium property using simple tight-binding method and more involved density functional codes:
 
 
a) Using the nearest-neighbor tight-binding Hamiltonian with single <math> p_z </math> orbital per carbon atom, compute the subband structure of three armchair GNRs whose width is <math> N_a=4,5, 30</math>. The expected result is shown in Lecture 9. Pay attention to select the proper interval of <math> k_x </math> values as the first 1D Brillouin zone.
 
 
b)  Using the nearest-neighbor (<math> t_1=2.7 </math> eV) tight-binding Hamiltonian with single <math> p_z </math> orbital per carbon atom, compute the subband structure of three armchair GNRs whose width is <math> N_z=4,5, 30</math>. The expected result is shown in Lecture 9. Plot the amplitude squared <math> |\chi(y)|^2 </math> across <math> N_z=30</math> ZGNR as the transverse part of a selected eigenfunction  (i.e., conducting channel)  whose eigenergy is close to the Dirac point <math> E=10^{-3} \gamma </math>. This plot should show that probability to find electron peaks around the nanoribbons edges.
 
 
c) Repeat subband structure calculations for <math> N_a=5 </math> AGNR and <math> N_z=5 </math> ZGNR using the tight-binding Hamiltonian which includes up to third-nearest neighbour hoppings whose values are: <math> t_1=2.7 </math> eV,  <math> t_2 = 0.20 </math> eV, and <math> t_3 = 0.18</math> eV. Comment on the difference between this result and  a) and b).
 
 
d) At low temperatures, the energy band gap <math> \approx  0.5 K </math> due to intrinsic spin-orbit coupling, as well as the chiral spin-filtered edge states whose subbands pass through the gap, should become visible in experiments. This systems, termed topological insulator  
where  time-reversal invariance ensures the crossing of the energy levels  at special points in the Brillouin zone so that their energy spectrum cannot be adiabatically deformed into topologically trivial insulator without such states, can be studied using the following tight-binding model:
 
<math> \hat{H}_{\mathrm{TI}} = - t_1 \sum_{\langle ij \rangle} \hat{c}_{i}^\dagger \hat{c}_{j}
+ \frac{2i}{\sqrt{3}} t_{\mathrm{SO}} \sum_{\langle \langle ij \rangle \rangle} \hat{c}_i^\dagger \hat{\mathbf{\sigma}} \cdot (\mathbf{d}_{kj} \times \mathbf{d}_{ik})\hat{c}_j </math> (1)
 
where <math> \hat{c}^\dagger_i = (\hat{c}^\dagger_{i\uparrow}, \hat{c}^\dagger_{i\downarrow}) </math> are electron creation operators and <math> \hat{\mathbf{\sigma}} </math> is the vector of the Pauli matrices. The third sum in Eq.~(1)  introduces the intrinsic SO coupling compatible with the symmetries of the honeycomb lattice. The SO coupling acts as spin-dependent next-nearest neighbor hopping where <math> i </math> and <math> j </math> are two next-nearest neighbor sites, <math> k </math>  is the only common nearest neighbor of <math> i </math> and <math> j </math>, and <math> \mathbf{d}_{ik} </math> is a vector pointing from  <math> k </math> to <math> i </math>. Compute the band structure of <math> N_z=30</math> ZGNR with SO coupling described by Hamiltonian (1) assuming <math> t_1 = 2.7 </math> eV and  <math> t_{\mathrm{SO}}=0.03 t_1 </math>. The value for <math> t_{\mathrm{SO}} </math> is selected to be much larger than the realistic one in order to see clearly opening of the band gap  <math> \Delta_{\rm SO}=6\sqrt{3} t_{\rm SO} </math> in your figure.
 
 
e) Using DFT code [http://www.icmab.es/siesta/tutorials SIESTA] (installed of fermi), compute subband structure for <math> N_a=5 </math> AGNR and <math> N_z=5 </math> ZGNR and compare this with your result in c).
 
 
MAIN REFERENCE: A. Cresti, N. Nemec, B. Biel, G. Niebler, F. Triozon, G. Cuniberti, and S. Roche, ''Charge transport in disordered graphene-based low-dimensional materials'', Nano Research  '''1''', 361 (2008). [http://www-drfmc.cea.fr/Phocea/file.php?class=pisp&reload=1226481222&file=sroche/files/22/22_88_.pdf [PDF]].
 
 
REFERENCE FOR GNR AS TOPOLOGICAL INSULATOR: C. K. Kane and E. J. Mele, ''Quantum spin Hall effect in graphene'', [http://link.aps.org/doi/10.1103/PhysRevLett.95.226801 Phys. Rev. Lett. '''95''', 226801 (2005)].


== Final Research Project ==
== Final Research Project ==
*[[Conductance and shot noise of pseudodiffusive and diffusive electron transport through graphene nanoribbons]]

Latest revision as of 13:43, 30 November 2022

Guidelines

The idea of a Research Project is to tackle a single topic (which could be composed of several intertwined problems) borrowed from recent research literature and spend time on researching references, doing computation, and writing a Report. This should allow students to:

  • practice how a scientist really thinks - if you learn anything in school, it should be how to think; memorization is less useful since you can always look it up.
  • get insight into the science of tomorrow which is not the science of yesterday; the new ideas of tomorrow, in any branch of science, will not come from just decades old physics.
  • get experience in the same activities that Ph.D. scientists conduct on a daily basis.

When you have enough results to tell a coherent story, you should end the Research Project by writing (in a clear writing style, obeying the rules of grammar and spelling) and submitting a Report. The Report should be understandable to a person who has not done the assignment.

Format of the report for the midterm project

The midterm project should be finalized as a paper similar to research articles dealing with Mesoscale and Nanoscale Physics posted every day on arxiv.org. The format of the paper mimicking this is:

  • Title, Name of the person and affiliation, Abstract, PACS codes, Introduction, Methods, Results, Dicussion, Conclusion, and References.
  • Paper should be typed in two column style. For this you can use:
    • LaTeX in the form of RevTeX style for Physical Review journals, as implemented by PHYS 824 template and the embedded EPS figure for this example. You can also find more examples of typing mathematical formulas in Math into LaTeX: How to Beautify Equations (and the embedded EPS figure).
    • Open Office version of Microsoft Word (Word itself is not advisable since you need additional programs, such as MathType, on the top of it to be able to type equations).
  • The final report of the midterm project should be produced as a PDF file and emailed to the instructor, together with your Python, Matlab etc. codes (compress everything into a single file) before the deadline.

Format of the report for the final project

The final project will be reported through a Poster Session, during the final exam time, and it will also include peer reviewing. To make a poster, you can use this PowerPoint Template. Poster printing is available in Smith Hall and its cost will be covered by the Department.

Midterm Research Project

Final Research Project

Retrieved from "https://wiki.physics.udel.edu/wiki_phys824/index.php?title=Research_Projects&oldid=3130"